भूमध्यरेखीय एलिवेशन ब्लॉक्स

ठोस भूमध्यरेखीय सागौन। क्योंकि फर्श चुंबकीय रूप से तटस्थ नहीं है।

$295–$595 Floor ($295), In-Wall ($395), Terrestrial Decoupling upgrade ($495), On-Wall Blocking Kit ($595). Floor, In-Wall, and Terrestrial ship as sets of five blocks; the On-Wall Blocking Kit ships as a densely-spaced run of teak elevation blocks plus a floor riser per 10-foot single-cable run — enough to hold the cable dead straight inside a cable-raceway crown molding. The raceway cornice itself is yours to supply and finish, or add our optional Raceway Cornice (+$300) in paint-ready, oiled walnut, or twill carbon fibre with an LED-cove ledge.
भूमध्यरेखीय एलिवेशन ब्लॉक्स

प्रमुख विशेषताएँ

  • भूमध्य रेखा के 5° के भीतर उगाया गया प्लांटेशन सागौन
  • बिना फिनिश छोड़ा गया — वार्निश के ड्रायर यौगिक (कोबाल्ट, मैंगनीज) चुंबकीय रूप से सक्रिय हैं
  • एंड-ग्रेन भार-पथ, 22mm हाथ से रेता हुआ केबल क्रैडल
  • केबल रन के प्रति 0.6m पर एक ब्लॉक; पाँच का सेट 3m कवर करता है
  • छिपे रन के लिए अचुंबकीय पीतल फास्टनरों वाला इन-वॉल विकल्प
  • टेरेस्ट्रियल डीकपलिंग अपग्रेड: 120mm ब्लॉक, क्रमांकित प्रोविनेंस प्रमाणपत्र
  • On-Wall Blocking Kit: a densely-spaced run of teak elevation blocks holds the cable dead straight — no catenary — inside a cable-raceway crown molding (yours to finish, or our optional Raceway Cornice in walnut or carbon fibre with an LED-cove ledge); a teak floor riser lifts the cable off the floor at the component

विनिर्देश

सामग्री Quarter-sawn teak, plantation-grown within 5° of the equator
फिनिश None (commercial varnish driers contain cobalt and manganese)
उठान ऊँचाई 60mm (Floor / In-Wall) · 120mm (Terrestrial Decoupling) · wall/ceiling junction (On-Wall)
केबल क्रैडल 22mm semicircular channel, hand-sanded to 320 grit
रेसवे कॉर्निस (वैकल्पिक) Cable-raceway crown molding with an LED-cove ledge — paint-ready, oiled walnut, or twill carbon fibre (+$300). Not required if you supply your own raceway cornice
कॉर्निस पहुँच (दीवार पर) Raceway molding front face lifts off for seating and servicing the blocks without dismounting the cornice
फ़्लोर राइज़र (दीवार पर) One teak riser block lifts the cable up off the floor at the component termination
प्रति रन ब्लॉक Floor / In-Wall: 5 blocks per cable per 10-ft (3m) run (one per 0.6m, gentle catenary). On-Wall: ~10 blocks per cable per 10-ft run (one per ~0.3m) so the cable runs dead straight with no sag, plus one floor riser
सेट आकार Floor / In-Wall / Terrestrial: 5 blocks per set. On-Wall Blocking Kit: ~10 teak blocks + 1 floor riser per 10-ft single-cable run (raceway cornice sold separately)
तंतु अभिविन्यास End-grain vertical (load-bearing axis)
चुंबकीय पारगम्यता μr = 1.00000 (measured, dry teak)
तटस्थता ग्रेड 5N as delivered (Fe + Mn ≤ 10 ppm, measured per billet); 6N by selection
परावैद्युत स्थिरांक 2.1 at 12% moisture content
नमी की मात्रा 12 ± 1%, kiln-dried at origin (0.06° S)
फास्टनर (दीवार के भीतर / दीवार पर) #8 brass screws (In-Wall) and brass keyhole mounts (On-Wall) included — steel fasteners void the warranty
  • 0.0000° अक्षांश पर प्रमाणित
  • चुंबकीय रूप से तटस्थ
  • भूमध्यरेखीय शुद्धता सूचकांक 99.9999%

आपके सिस्टम का हर केबल अपना सफ़र एक ही तरह समाप्त करता है: फर्श पर पड़े हुए। फर्श वह सबसे बड़ी एकल वस्तु है जिसे आपका केबल छूता है, और वह तटस्थ नहीं है। कंक्रीट स्लैब स्टील की छड़ों से प्रबलित होते हैं। लकड़ी के फर्श सैकड़ों लौहयुक्त कीलों से जड़े होते हैं। कालीन हर कदम के साथ ट्राइबोइलेक्ट्रिक आवेश संचित करता है। इस सतह पर सीधे पड़ा केबल इन सबसे धारिता और चुंबकीय रूप से युग्मित रहता है — अपनी पूरी लंबाई में, जब तक आप सिस्टम के मालिक हैं।

भूमध्यरेखीय एलिवेशन ब्लॉक्स उस युग्मन को उस संरचनात्मक सामग्री से तोड़ते हैं जो हमारे अब तक के मापन में सबसे चुंबकीय-निष्क्रिय है: लकड़ी। हर ब्लॉक भूमध्य रेखा के पाँच डिग्री के भीतर उगाए गए प्लांटेशन सागौन से क्वार्टर-सॉन काटा गया है, मूल स्थान पर ही भट्ठी में सुखाया गया, और इस तरह मिल किया गया कि एंड ग्रेन ऊर्ध्वाधर रहे और भार-पथ रेशों के साथ चले। ब्लॉक बिना फिनिश के दिए जाते हैं — यह सौंदर्य का चुनाव नहीं, बल्कि इसलिए कि व्यावसायिक वुड फिनिश धात्विक ड्रायर यौगिकों — आमतौर पर कोबाल्ट और मैंगनीज लवणों — से क्योर होती हैं, और हम अंतिम चरण में पेड़ का काम बर्बाद नहीं करेंगे। 22mm का क्रैडल चैनल, 320 ग्रिट तक हाथ से रेता हुआ, जैकेट को दबाए बिना केबल को सहारा देता है। प्रति 0.6 मीटर एक ब्लॉक; पाँच का सेट मानक 3-मीटर रन को कवर करता है।

छिपे हुए केबल रन भी अपवाद नहीं हैं। दीवार के भीतर बिछाया गया केबल कैविटी की निचली प्लेट पर टिका होता है — अनुपचारित फ्रेमिंग लकड़ी, कंस्ट्रक्शन एडहेसिव, और जो भी कीलें कारीगर की थैली में बची थीं। इन-वॉल कॉन्फ़िगरेशन वही एलिवेशन अनुशासन दीवार के भीतर ही लागू करता है: पाँच ब्लॉक, साथ दिए गए पीतल के स्क्रू के लिए प्री-ड्रिल्ड, उसी 0.6-मीटर अंतराल पर फ्रेमिंग में लगाए गए। दीवार खोलना और फिर से बंद करना इंस्टॉलर की ज़िम्मेदारी है, लेकिन भौतिकी को इसकी परवाह नहीं कि केबल आपको दिखता है या नहीं। जिन इंस्टॉलेशनों में पूर्ण आइसोलेशन उचित हो, वहाँ टेरेस्ट्रियल डीकपलिंग अपग्रेड लिफ्ट ऊँचाई को दोगुना कर 120mm कर देता है और हर ब्लॉक को उसके स्रोत अक्षांश तक ट्रेस करने वाले क्रमांकित प्रोविनेंस प्रमाणपत्र के साथ भेजा जाता है।

बारीक शर्तें

  • * Results in non-equatorial environments may vary. In-Wall option: wall opening and drywall reinstatement are the responsibility of the installer. On-Wall Blocking Kit: only the teak blocks and floor riser are supplied; the cable-raceway crown molding is customer-supplied unless the optional Raceway Cornice is added, and cornice mounting and finishing are the responsibility of the installer.