বিষুবীয় এলিভেশন ব্লক

নিরেট বিষুবীয় সেগুন কাঠ। কারণ মেঝে চৌম্বকীয়ভাবে নিরপেক্ষ নয়।

$295–$595 Floor ($295), In-Wall ($395), Terrestrial Decoupling upgrade ($495), On-Wall Blocking Kit ($595). Floor, In-Wall, and Terrestrial ship as sets of five blocks; the On-Wall Blocking Kit ships as a densely-spaced run of teak elevation blocks plus a floor riser per 10-foot single-cable run — enough to hold the cable dead straight inside a cable-raceway crown molding. The raceway cornice itself is yours to supply and finish, or add our optional Raceway Cornice (+$300) in paint-ready, oiled walnut, or twill carbon fibre with an LED-cove ledge.
বিষুবীয় এলিভেশন ব্লক

মূল বৈশিষ্ট্য

  • বিষুবরেখার 5°-এর মধ্যে সংগৃহীত প্ল্যান্টেশন সেগুন
  • ফিনিশ ছাড়া রাখা — বার্নিশের ড্রায়ার যৌগ (কোবাল্ট, ম্যাঙ্গানিজ) চৌম্বকীয়ভাবে সক্রিয়
  • এন্ড-গ্রেন ভার-পথ, 22mm হাতে ঘষা কেবল ক্রেডল
  • কেবল রানের প্রতি 0.6m-এ একটি ব্লক; পাঁচটির সেট 3m কভার করে
  • লুকানো রানের জন্য অচৌম্বকীয় পিতল ফাস্টেনারসহ ইন-ওয়াল বিকল্প
  • টেরেস্ট্রিয়াল ডিকাপলিং আপগ্রেড: 120mm ব্লক, ক্রমিক-নম্বরযুক্ত প্রভেন্যান্স সার্টিফিকেট

স্পেসিফিকেশন

উপাদান Quarter-sawn teak, plantation-grown within 5° of the equator
ফিনিশ None (commercial varnish driers contain cobalt and manganese)
উত্তোলনের উচ্চতা 60mm (Floor / In-Wall) · 120mm (Terrestrial Decoupling) · wall/ceiling junction (On-Wall)
কেবল ক্রেডল 22mm semicircular channel, hand-sanded to 320 grit
রেসওয়ে কার্নিস (ঐচ্ছিক) Cable-raceway crown molding with an LED-cove ledge — paint-ready, oiled walnut, or twill carbon fibre (+$300). Not required if you supply your own raceway cornice
কার্নিসে প্রবেশ (দেয়ালে) Raceway molding front face lifts off for seating and servicing the blocks without dismounting the cornice
ফ্লোর রাইজার (দেয়ালে) One teak riser block lifts the cable up off the floor at the component termination
প্রতি রানে ব্লক Floor / In-Wall: 5 blocks per cable per 10-ft (3m) run (one per 0.6m, gentle catenary). On-Wall: ~10 blocks per cable per 10-ft run (one per ~0.3m) so the cable runs dead straight with no sag, plus one floor riser
সেটের আকার Floor / In-Wall / Terrestrial: 5 blocks per set. On-Wall Blocking Kit: ~10 teak blocks + 1 floor riser per 10-ft single-cable run (raceway cornice sold separately)
কাঠের আঁশের দিক End-grain vertical (load-bearing axis)
চুম্বকীয় ভেদ্যতা μr = 1.00000 (measured, dry teak)
নিরপেক্ষতা গ্রেড 5N as delivered (Fe + Mn ≤ 10 ppm, measured per billet); 6N by selection
পরাবৈদ্যুতিক ধ্রুবক 2.1 at 12% moisture content
আর্দ্রতার পরিমাণ 12 ± 1%, kiln-dried at origin (0.06° S)
ফাস্টেনার (দেয়ালের ভিতরে / দেয়ালে) #8 brass screws (In-Wall) and brass keyhole mounts (On-Wall) included — steel fasteners void the warranty
  • 0.0000° অক্ষাংশে প্রত্যয়িত
  • চৌম্বকীয়ভাবে নিরপেক্ষ
  • বিষুবীয় বিশুদ্ধতা সূচক 99.9999%

আপনার সিস্টেমের প্রতিটি কেবল তার যাত্রা একইভাবে শেষ করে: মেঝেতে শুয়ে। মেঝে হলো আপনার কেবলের স্পর্শ করা সবচেয়ে বড় একক বস্তু, এবং এটি নিরপেক্ষ নয়। কংক্রিটের স্ল্যাব ইস্পাতের রড দিয়ে শক্তিশালী করা। কাঠের মেঝে শত শত লৌহঘটিত পেরেক দিয়ে আটকানো। কার্পেট প্রতিটি পদক্ষেপে ট্রাইবোইলেকট্রিক চার্জ জমা করে। এই পৃষ্ঠের উপর সরাসরি শুয়ে থাকা কেবল তার সম্পূর্ণ দৈর্ঘ্য জুড়ে, যতদিন আপনি সিস্টেমের মালিক থাকবেন, এই সবকিছুর সাথে ধারকীয় ও চৌম্বকীয়ভাবে যুগ্মিত থাকে।

বিষুবীয় এলিভেশন ব্লক সেই যুগ্মন ভেঙে দেয় আমাদের এযাবৎ পরিমাপ করা সবচেয়ে চৌম্বকীয়ভাবে নিষ্ক্রিয় কাঠামোগত উপাদান দিয়ে: কাঠ। প্রতিটি ব্লক বিষুবরেখার পাঁচ ডিগ্রির মধ্যে জন্মানো প্ল্যান্টেশন সেগুন থেকে কোয়ার্টার-সন করাতে কাটা, উৎসস্থলেই ভাটায় শুকানো, এবং এমনভাবে মিল করা যাতে এন্ড গ্রেন উল্লম্ব থাকে ও ভার-পথ তন্তুর দিক বরাবর চলে। ব্লকগুলো ফিনিশ ছাড়াই সরবরাহ করা হয় — নান্দনিক পছন্দ হিসেবে নয়, বরং এই কারণে যে বাণিজ্যিক কাঠের ফিনিশ ধাতব ড্রায়ার যৌগ — সাধারণত কোবাল্ট ও ম্যাঙ্গানিজ লবণ — দিয়ে কিউর করা হয়, এবং আমরা শেষ ধাপে গাছের কাজ নষ্ট করতে যাচ্ছি না। 22mm ক্রেডল চ্যানেল, 320 গ্রিট পর্যন্ত হাতে ঘষা, জ্যাকেট না চেপে কেবলকে ধরে রাখে। প্রতি 0.6 মিটারে একটি ব্লক; পাঁচটির সেট একটি স্ট্যান্ডার্ড 3-মিটার রান কভার করে।

লুকানো কেবল রানও ছাড় পায় না। দেয়ালের ভিতরে বসানো কেবল গহ্বরের নিচের প্লেটে বিশ্রাম নেয় — অপরিশোধিত ফ্রেমিং কাঠ, নির্মাণ আঠা, এবং কারিগরের থলিতে যে পেরেকগুলো বাকি ছিল সেসব। ইন-ওয়াল কনফিগারেশন একই এলিভেশন শৃঙ্খলা দেয়ালের ভিতরেই প্রয়োগ করে: পাঁচটি ব্লক, সরবরাহকৃত পিতলের স্ক্রুর জন্য প্রি-ড্রিল করা, একই 0.6-মিটার ব্যবধানে ফ্রেমিংয়ে লাগানো। দেয়াল খোলা ও পুনঃস্থাপন ইনস্টলারের দায়িত্ব, কিন্তু আপনি কেবলটি দেখতে পান কি না তাতে পদার্থবিজ্ঞানের কিছু যায় আসে না। যেসব ইনস্টলেশনে সম্পূর্ণ আইসোলেশন প্রয়োজন, সেখানে টেরেস্ট্রিয়াল ডিকাপলিং আপগ্রেড লিফটের উচ্চতা দ্বিগুণ করে 120mm করে এবং প্রতিটি ব্লককে তার উৎস অক্ষাংশ পর্যন্ত ট্রেস করা ক্রমিক-নম্বরযুক্ত প্রভেন্যান্স সার্টিফিকেটসহ পাঠানো হয়।

সূক্ষ্ম মুদ্রণ

  • * Results in non-equatorial environments may vary. In-Wall option: wall opening and drywall reinstatement are the responsibility of the installer. On-Wall Blocking Kit: only the teak blocks and floor riser are supplied; the cable-raceway crown molding is customer-supplied unless the optional Raceway Cornice is added, and cornice mounting and finishing are the responsibility of the installer.