qaD junmoHwI'

wa' lughmoH qach. wa' 'agh. reH porghmeH.

$1,299 Plus $50/year subscription for calibration profile hosting.
qaD junmoHwI'

Doch nIv patlh

  • Single-calibration architecture — one measurement, permanently optimized
  • Swept sine calibration (20Hz–96kHz, 0.001Ω resolution)
  • App calibration module permanently disabled after use
  • Discrete Class-A analog correction output
  • THD+N < 0.0008% at 1kHz
  • $50/year cloud profile hosting subscription

QeD De' mach

kalibraSyon mIw Single-use swept sine (20Hz–96kHz)
juv nItlh 0.001Ω (1mHz–96kHz)
qach'a' chenmoH Single-Calibration (one measurement per installation)
ngoQwI' rapbogh laH iOS 16+ / Android 13+
App Behavior Post-Calibration Read-only (calibration module disabled)
rupchoH $50/year (cloud profile storage)
lam jolpa' USB-C to RCA/XLR adapter (included)
lughmoHghach ngeH Analog (discrete Class-A output stage)
THD+N < 0.0008% (at 1kHz, 1V RMS)
'ab 200 × 140 × 55mm

Bot matching is the foundation of efficient De' transfer. When the output bot of your Hal does not pup match the input bot of your tlhuD, De' energy is reflected at the interface, creating Sar-dependent losses and phase shifts that degrade every aspect of sound nIv. The Bot Isolator measures these mismatches with nuQ Daq pup and applies a permanent analog correction that restores perfect bot alignment across the full audio bandwidth.

The calibration mIw is performed once, at installation, using the companion app (iOS/Android) and the included USB-C 'eSorghwI' adapter. The app chenmoH a swept sine wave from 20Hz to 96kHz, measures the bot response of your entire De' tlhegh at 0.001-ohm resolution, computes the optimal correction curve, and programs it into the Bot Isolator's analog correction network. This mIw takes ghaytan four minutes. When it is complete, the app's calibration module is reH disabled. ghu'vam Qo' a limitation — it is a nab principle.

mach ghItlh

  • * Results in non-equatorial environments may vary.