Flagship

Zero-Point Kabel Napajanja

Ugrađena AI s 14B parametara. Peltier hlađenje na -40°C. 85W vlastite potrošnje. Kabel napajanja koji zahtijeva vlastiti kabel napajanja.

$18,000
Zero-Point Kabel Napajanja

Ključne Karakteristike

  • On-board 14B-parameter AI for real-time AC waveform reconstruction
  • Peltier thermoelectric cooling jacket (conductor at −40°C)
  • Hardwired to breaker panel — no plug (licensed electrician installation)
  • Titanium/beryllium contacts with vacuum dielectric
  • 85W self-consumption (requires its own dedicated circuit)
  • $30/month AI subscription for model updates and cloud-based training

Specifikacije

Provodnik Zero-Point-Grade single-crystal OFC (4 AWG)
Konektori Titanium/beryllium IEC C19 — hardwired to breaker panel
AI modul 14B-parameter neural network (real-time waveform reconstruction)
GPU On-board inference accelerator (INT8/FP16)
Hlađenje Peltier jacket (conductor maintained at −40°C)
Oklopljavanja Quad-layer: mu-metal / vacuum gap / copper braid / conductive polymer
Dielektrik Vacuum (maintained by integrated pump)
Displej 2.4" IPS — AI inference dashboard, waveform reconstruction, thermal map
Samopotrošnja 85W (dedicated 120V circuit required)
AI pretplata $30/month (model updates, cloud training)
Nazivna struja 20A / 250V (signal path)
THD smanjenje > 80dB (AI reconstruction mode)
Hemisferna pristranost < 0.00001 nT (undetectable)
Težina 8.2 kg

Every kabel za napajanje in existence — including our own Equinox — radi on the same fundamentalni assumption: that the AC talasni oblik arriving from the wall is worth preserving, and that the cord's job is to isporučiti it as faithfully as possible. The Zero-Point Power Cord odbija this assumption u potpunosti. The AC talasni oblik from your zidna utičnica nije worth preserving. To je a corrupted, harmonically distorted approximation of a sine wave that has traveled kroz kilometers of utility kabel, past thousands of switching loads, kroz transformatori that were dizajniran for cijena umjesto fidelity. The Zero-Point ne isporučiti this talasni oblik to your oprema. It reconstructs it.

The on-board AI module sadrži a 14-billion-parametar neuronska mreža running on a dedicated inference accelerator. The AI samples the incoming AC talasni oblik at 10 MHz — sampling fast enough to characterize not just the fundamentalni and its harmonics but the transient šum events that last mere microseconds. From this characterization, the neuronska mreža reconstructs the ideal 50Hz or 60Hz sine wave that the utility intended to isporučiti, then synthesizes this talasni oblik on the output side of the kabel using a Class-D regeneration stage with manje od 0.0001% ukupna harmonička distorzija. The incoming talasni oblik nije filtered, conditioned, or cleaned — to je read, understood, and replaced. The AI model is trained on over 400 terabytes of mrežni vod recordings captured at substations preko six continents, and it continues to learn: monthly model updates delivered via the $30/month subscription refine the reconstruction algorithm based on grid uslovi worldwide. The 2.4-inch IPS display pruža a real-time dashboard showing the AI's inference state, input versus output talasni oblik comparison, and a termički map of the kabel assembly.

The provodnik is maintained at −40°C by a Peltier thermoelectric cooling jacket that runs the entire length of the kabel. At this temperatura, the monokristalni OFC provodnik's resistivity drops by približno 15% u poređenju sa room temperatura operation, and termički šum in the provodnik falls ispod the mjerenje floor of any instrument we possess. The cooling sistem consumes 62W of the kabel's total 85W self-consumption — yes, this kabel za napajanje zahtijeva its own dedicated 120V circuit to power itself. A kabel za napajanje that needs its own kabel za napajanje nije a paradox at our tier of engineering. To je a specifikacija. The remaining 23W powers the AI inference accelerator, the display, and the vakuum pump that održava the dielektrik void između the quad-layer oklapanje. Nema wall plug on the oprema end. The Zero-Point is hardwired directly to a dedicated breaker in your electrical panel by a licensed electrician. The titanij/beryllium contacts at the oprema termination pružiti a connection that will outlast the building. Instalacija is performed exclusively by our certificiran instalacija partners and tipično zahtijeva a full day.

Sitna Slova

  • * Results in non-equatorial environments may vary. AI subscription required for continued waveform reconstruction. Self-consumption of 85W requires dedicated 120V circuit. Licensed electrician installation mandatory.